DMT12100
A versatile DC-DC battery charger for charging batteries from either PV solar or the engine/alternator battery.
A versatile DC-DC battery charger for charging batteries from either PV solar or the engine/alternator battery.
DC to DC Charger Series
These unique DC – DC chargers provide the ability to charge batteries from two independent DC input sources: either via a PV solar panel(s) when stationary or from the engine/alternator while driving. Ideal for charging batteries in Boats, RVs, Van Conversions and Trucks.
Features include:
Features And Benefits
Dimensions (L x W x H):
DMT12100: 14.0“ x 8.1″ x 3.8” (356mm x 205mm x 97mm)
Weight:
DMT12100: 7.1 lbs. / 3.23 Kg
| KISAE DC – DC BATTERY CHARGERS | DMT 12100 |
| DC CONTROLLER OUTPUT | |
| OUTPUT CURRENT (MAXIMUM) | 100A |
| OUTPUT VOLTAGE RANGE | |
| CHARGE | 13.5 – 15.5V |
| FLOAT | 13.0 – 13.8V for 12V Battery |
| EQUALIZE | 15.5 V |
| CHARGING CONTROL | 5 Stages (Test/Bulk/Absorption/Float/Recharge) |
| DC OUTPUT BANK | One |
| SELECTABLE BATTERY TYPE | Gel, AGM, Flooded, Lithium, Program, and Flooded batteries (w/ equalization for Flooded batteries) |
| PARASITIC CURRENT | < 500 uA |
| EFFICIENCY | > 90% |
| DC INPUT (Battery/Alternator): | |
| DC INPUT RANGE | 10.5 – 32Vdc |
| DC INPUT NOMINAL OPERATION | 13.2V for 12V input charging system 26.4V for 24V input charging system |
| 26.4V for 24V input charging system | |
| ENGINE START CONTROL: ON | DC Input from Battery/Alternator |
| ENGINE START CONTROL: OFF | DC Input from PV Input (if available) |
| MAXIMUM INPUT CURRENT: | 100A |
| DC INPUT (PV INPUT) | |
| DC INPUT RANGE | 55Vdc |
| DC INPUT NOMINAL OPERATION | 17.5Vdc for 12V PV panels connected in parallel 35.0Vdc for Dual 12V PV panel connected in series |
| 35Vdc for 12V PV panels connecting in series | |
| MPPT TRACKING EFFICIENCY | >98% |
| DC OUTPUT PROTECTION AND FEATURES: | |
| REVERSE BATTERY | Yes (shutdown), Auto Reset |
| DC OUTPUT SHORT CIRCUIT | Yes (shutdown), Auto Reset |
| OVER CHARGE | Yes (shutdown), Auto Reset |
| OVER TEMPERATURE | Yes (de-rated and shutdown) |
| COOLING | Force Air Ventilation |
| TEMPERATURE SETTING | High, Normal, Low (no battery temp. sensor connected) |
| BATTERY TEMPERATURE SENSOR PORT | RJ12 (optional battery temperature sensor use) |
| DIGITAL DISPLAY PORT | RJ12 (optional display panel use) |
| DISPLAY PANEL (INCLUDED) | |
| DIGITAL DISPLAY | LED display with backlighting |
| Voltage, Current, Status, Error Code | |
| Communication | CANBUS |
| ENCLOSURE | |
| DC INPUT CONNECTION | Hardwire |
| DC OUTPUT CONNECTION | Hardwire |
| SIZE | |
| DIMENSIONS | 14.0“ × 8.1” × 3.8” 356mm x 205mm x 97mm |
| NET WEIGHT | 7.1 lbs. / 3.23 Kg |
| REGULATORY COMPLIANCE | |
| MARKINGS | CE, e-Mark |
| CONFORMANCE | LVD, EMC |
| EMI/EMC | CE EMC / Tested to E9-09 |
| ACCESSORIES (Optional) | |
| BATTERY TEMPERATURE SENSOR | BTS 10K (for battery charging voltage adjustment) |
